HOW TO PROGRAM ROKU UNIVERSAL REMOTE?

Roku Universal Remotes can be easily programmed to work with a whole range of device. You can connect your Roku Remote with your TV by following a very simple procedure and in case you are facing any difficulties or are unable to do, you can check out our step-by-step guides below to easily program your Roku Universal Remote to work with your TV.

ROKU UNIVERSAL REMOTE

STEP BY STEP GUIDE TO PROGRAM YOUR ROKU UNIVERSAL REMOTE TO ROKU DEVICES

Follow the steps given below to easily program your Program Roku Remote to work with other TV devices along with Roku Devices:

  • Before you begin with the process make sure that you have put in a working pair of batteries into your Roku remote
  • Turn ON your Roku TV.
  • Hold the remote a little close to your Roku TV. You can also choose to keep the remote on some table close to your TV.
  • This would help the TV to scan the remote and initiate the automatic pairing.
  • You can also add another remote in addition to your Roku universal remote in case you want another remote for controlling the TV.
  • To program your Roku Remote, go to the Home window and scroll down to the Settings option. Click on it.
  • You will see the devices that have been paired with your Roku TV. Select “Remote” followed by “Pair Remote” option. This should open a widow that gives you the details about the remote that is paired currently.
  • Now press the Right Arrow button on your paired remote and then follow the on screen instructions to program your Roku Universal Remote.

STEP BY STEP GUIDE TO PROGRAM ROKU UNIVERSAL REMOTE TO MULTIPLE TV?

Follow the steps given below to easily program your Roku Universal Remote to work with other TV devices along with Roku TV:

  • The first thing that you need to do is put in a fresh pair of batteries. To do so, you can unpack your remote to open the back panel and insert new batteries in the slot provided.
  • Now look for pairing button and then press it to start the pairing process of the remote with the TV.
  • When you do so, the pairing light should start flickering. A message related to a pairing request will also be displayed on your TV.
  • In case the light doesn’t blink, you can release the button and press it again after some time has passed.
  • • Now, go to the “Settings” option under the Home menu and select the “Program Roku Remote” option under “Settings”.
  • Switch OnThen select the “Pair Remote” option and after doing so, tap the Right Arrow button.
  • This should open a window with instructions on how to pair an additional remote. Follow the on-screen instructions to complete the process.
  • Once you have completed the process, you would have successfully paired a new remote, in addition to your Roku Universal Remote, with your Roku TV.

HOW TO PROGRAM UNIVERSAL REMOTES TO WORK WITH ROKU?

Roku TVs are also compatible with all kinds of Universal Remotes. This also means that you can easily program DirecTV remote to work with your Roku Device. Scroll below to find our step-by-step guide on How To Program DirecTV Remote To Roku TV.

HOW TO PROGRAM RCA UNIVERSAL REMOTE TO ROKU TV?

  • If you are using an RCA universal remote, turn your Roku TV ON by pressing and releasing the power button on your remote
  • Doing so should enable the ON-OFF button to stay on.
  • Press the “Device” button and the ON-OFF buttons simultaneously and then release both the buttons.
  • Find the Play button on your remote. Press it and wait for your Roku TV to respond. This should take about 3-5 seconds.
  • In case Roku TV does not respond, press the Play button again after five seconds and keep doing so until your device turns Off.
  • Now, Switch On the device by pressing the Reverse button. Press the Stop button for saving the new code.
  • Program Roku Remote by entering codes: you can find the model number of your remote written on the remote.
  • Using the model number, you can get a code from the list of codes for your remote from the official site. This will be used for the setup.
  • Turn your Roku TV on and then press and hold the “Setup” button on your remote
  • Release the button after the light starts to flash. Now, press the “Device” button and then enter the three or four digit code.
  • If you have typed the code correctly, the Indicator light will stop flashing
  • Now press the Power button an your device to see if the Roku TV switches Off. If it does, then you have programmed the remote successfully

HOW TO PROGRAM DIRECTV REMOTE TO TCL ROKU TV?

You can easily program DirecTV remote to work with the TCL Roku TV. This step-by-step guide has simple steps that you can easily follow to connect your DirecTV remote to your TV. Just follow the steps given below to successfully Setup your Remote.

  • Find the “Select” and “Mute” buttons and press and hold them both simultaneously
  • This should lead for the green light on the remote to blink. When it blinks twice, release the buttons.
  • Now type the code “11756” using the Number pad on your TV remote.
  • Place the remote close to the TV and press the “Volume Up” button to see if the volume is increasing or not.
  • If the volume starts increasing, press the “Select” and “Mute” button simultaneously again.
  • Type “960” on the screen using the remote.
  • This should prompt the green light on the remote to flash again.
  • In case the volume is not increasing, repeat the steps 1 to 4 until you are successful.
  • If you have done all the above steps then you should have been able to Program DirecTV Remote to work with Roku, successfully

HOW TO PROGRAM DIRECTV REMOTE TO ROKU TV?

If you are wondering How To Program Direct TV Remote To Roku TV, you need not worry. Written below is a step-by-step guide that enables you to manually Program DirecTV Remote to work with Roku. You just need to follow the following instructions to make sure that you are able to do it successfully and effortlessly:

  • Turn the power ON on your DirecTV remote and find the five-digit code from the official website. You should know the model number of your device to do so which can be found on the back of your remote.
  • Also confirm that the “Mode” menu on your remote is set to TV
  • Press and hold the “Mute” and “Select” buttons simultaneously and release them after the green light flashes twice
  • Use the Number pad on the remote to enter the five digit code which you got from the official site
  • Now place the remote close to the TV and check if the by pressing the “Volume up” button you are able to turn the volume high.
  • If the volume starts increasing, press and hold the “Mute” and “Select” buttons until the green light flashes again.
  • This time, enter “960” from the remote keypad. The green light will flash again.
  • Assign the “Mode” Switch to the Direct TV position.

If you have followed all the steps till here, you have been able to successfully program DirecTV remote to your TV.

PROGRAM DIRECTV REMOTE TO ROKU TO